Straight from the manufacturer's own manual.* Every number shows its page.* If we don't know, we say we don't know.*
GARAGE JOB ENGINE™ * 5W-AI

Owner’s manual specs

2016 GMC Terrain Specs: Oil Capacity, Fluids, Maintenance Schedule & Fuse Box

Figures for the 2016 GMC Terrain, copied from GMC’s own owner’s manual. Every one links to the manual page it came from.

From the manufacturer’s manuals. Every figure here is copied from the manufacturer's own manual, with a link to the page it came from. Where a manual is unclear or contradicts itself, we leave the figure out.

Engines in this manual: 2.4L L4, 3.6L V6. Figures that differ by engine say which engine they are for.

Fluids & capacities

All engines

2.4L L4

3.6L V6

Maintenance schedule

Normal service schedule

Use this for ordinary driving.

ServiceWhen
Replace engine air cleaner filter. (3)

Source: 2016 GMC Terrain/Terrain Denali Owner Manual, page 277

Every 45,000 mi(72,000 km)
Replace passenger compartment air filter. (1)

Source: 2016 GMC Terrain/Terrain Denali Owner Manual, page 277

Every 22,500 mi(36,000 km)
Rotate tires and perform Required Services. Check engine oil level and oil life percentage. Change engine oil and filter, if needed.

Source: 2016 GMC Terrain/Terrain Denali Owner Manual, page 277

Every 7,500 mi(12,000 km)

Severe service schedule

Use this if you tow, idle a lot, drive short trips in the cold, or run in dust.

ServiceWhen
Replace engine air cleaner filter. (3)

Source: 2016 GMC Terrain/Terrain Denali Owner Manual, page 279

Every 45,000 mi(72,000 km)
Replace passenger compartment air filter. (1)

Source: 2016 GMC Terrain/Terrain Denali Owner Manual, page 279

Every 22,500 mi(36,000 km)
Rotate tires and perform Required Services. Check engine oil level and oil life percentage. Change engine oil and filter, if needed.

Source: 2016 GMC Terrain/Terrain Denali Owner Manual, page 279

Every 7,500 mi(12,000 km)

Oil life & reset procedures

Engine oil life system reset

Before you start

  • Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change.
  • Turn the ignition to ON/RUN, with the engine off.

Steps

  1. Turn the ignition to ON/RUN, with the engine off.
  2. Press the DIC MENU button to display the Vehicle Information menu.
  3. Press either the up or down arrows to view REMAINING OIL LIFE.
  4. Press the SET/CLR button until 100% is displayed.
  5. Turn the key to LOCK/OFF.

You’ll know it worked: 208 Vehicle Care The system is reset when the CHANGE ENGINE OIL SOON message goes off.

Source: 2016 GMC Terrain/Terrain Denali Owner Manual, page 207

Fuse box locations & fuse chart

Engine Compartment Fuse Block

What each fuse protects

FuseAmpsProtectsSource
1—Cooling fan 1p.227
2—Cooling fan 2p.227
5—Memory seat modulep.227
6—Power seat-leftp.227
7—Instrument panel fuse block 1p.227
8—Rear defoggerp.227
11—Instrument panel fuse block 2p.227
12—Sunroofp.227
13—Antilock brake system pumpp.227
14—Instrument panel fuse block 3p.227
15—Power windows-leftp.227
16—Antilock brake system modulep.227
17—Transmission control module batteryp.227
18—Trailer parking lightp.227
19—AIR pump solenoidp.227
20—Engine control module batteryp.227
21—Canister ventp.227
22—Trailer-left side (if equipped)p.227
23—Liftgate modulep.227
25—Trailer-right side (if equipped)p.228
26—Rear accessory power outletp.228
27—Memory mirror modulep.228
28—Regulated voltage control battery sensorp.228
29—Front wiperp.228
30—Rear wiperp.228
31—A/Cp.228
32—Rear latchp.228
33—Heated mirrorsp.228
34—Hornp.228
35—High-beam headlamp-rightp.228
36—High-beam headlamp-leftp.228
37—Ignition coil-evenp.228
40—Front fog lampsp.228
41—Post catalytic converter O2 sensorp.228
42—Engine control modulep.228
43—Pre-catalytic converter O2 sensorp.228
44—Transmission control modulep.228
45—Mirrorp.228
46—Fuel system control module ignitionp.228
48—Rear drive modulep.228
49—Lift gate module logicp.228
50—Instrument panel fuse block ignitionp.228
51—Heated seat-frontp.228
53—Engine control modulep.228
54—Rear vision camerap.228
55—Electric power steeringp.228
56—AIR pump solenoidp.228
57—Brake boosterp.228
58—Cooling fan lowp.228
59—Headlamp high-beamp.228
60—Cooling fan controlp.228
61—Wiper On/Off controlp.228
62—A/Cp.228
63—Rear defoggerp.228
64—Wiper speedp.228
65—Fog lampsp.228
66—Engine controlp.228
67—Starterp.228
70—AIR pump motorp.229
77—Power seat-rightp.229
78—Passenger power lumbarp.229

Instrument Panel Fuse Block

Where to find it

Instrument Panel Fuse Block The instrument panel fuse block is located on the passenger side panel of the center console.

open the fuse panel door from the passenger side by pulling it out.

Source: 2016 GMC Terrain/Terrain Denali Owner Manual, page 229

What each fuse protects

FuseAmpsProtectsSource
1—Steering wheel dimmingp.230
4—Body control module 1p.230
5—Infotainmentp.230
6—Body control module 7p.230
7—Noise control modulep.230
8—Body control module 4p.230
9—Radiop.230
11—Rear parking assist modulep.230
12—HVAC/Batteryp.230
13—Auxiliary power frontp.230
14—HVAC/Ignitionp.230
16—Body control module 5p.230
17—Auxiliary power rearp.230
18—Instrument panel ignitionp.230
19—Universal garage door openerp.230
20—Body control module 6p.230
22—Sensing/Diagnostic module ignitionp.230
23—Front camerap.230
25—Transmission gear shift position indicatorp.230
31—Amplifierp.230
32—Discrete logic ignition switchp.230
33—Communications integration modulep.230
34—Body control module 2p.230
35—Sensing/Diagnostic module batteryp.230
36—Data link connectp.230
37—Instrument panel batteryp.230
38—Passenger sensing system modulep.230
40—Body control module 8p.230
41—Logistic relay (if equipped)p.230
42—Retained accessory power relayp.230

More fuse pages in the manual

Diagrams and printed legends we can’t host. Check the box name printed on a diagram before counting positions.

Repair jobs for the 2016 GMC Terrain

All GMC repair jobs →

Other GMC Terrain years