Straight from the manufacturer's own manual.* Every number shows its page.* If we don't know, we say we don't know.*
GARAGE JOB ENGINE™ * 5W-AI

Owner’s manual specs

2014 GMC Terrain Specs: Oil Capacity, Fluids, Maintenance Schedule & Fuse Box

Figures for the 2014 GMC Terrain, copied from GMC’s own owner’s manual. Every one links to the manual page it came from.

From the manufacturer’s manuals. Every figure here is copied from the manufacturer's own manual, with a link to the page it came from. Where a manual is unclear or contradicts itself, we leave the figure out.

Engines in this manual: 2.4L L4, 3.6L V6. Figures that differ by engine say which engine they are for.

Fluids & capacities

All engines

2.4L L4

3.6L V6

Maintenance schedule

Normal service schedule

Use this for ordinary driving.

ServiceWhen
Replace engine air cleaner filter. (3)

Source: 2014 GMC Terrain/ Terrain Denali Owner Manual, page 11-5

Every 45,000 mi(72,000 km)
Replace passenger compartment air filter. (1)

Source: 2014 GMC Terrain/ Terrain Denali Owner Manual, page 11-5

Every 22,500 mi(36,000 km)
Rotate tires and perform Required Services. Check engine oil level and oil life percentage. Change engine oil and filter, if needed.

Source: 2014 GMC Terrain/ Terrain Denali Owner Manual, page 11-5

Every 7,500 mi(12,000 km)

Severe service schedule

Use this if you tow, idle a lot, drive short trips in the cold, or run in dust.

ServiceWhen
Replace engine air cleaner filter. (3)

Source: 2014 GMC Terrain/ Terrain Denali Owner Manual, page 11-7

Every 45,000 mi(72,000 km)
Replace passenger compartment air filter. (1)

Source: 2014 GMC Terrain/ Terrain Denali Owner Manual, page 11-7

Every 22,500 mi(36,000 km)
Rotate tires and perform Required Services. Check engine oil level and oil life percentage. Change engine oil and filter, if needed.

Source: 2014 GMC Terrain/ Terrain Denali Owner Manual, page 11-7

Every 7,500 mi(12,000 km)

Oil life & reset procedures

Engine oil life system reset

Before you start

  • Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change.
  • Turn the ignition to ON/RUN, with the engine off.

Steps

  1. Turn the ignition to ON/RUN, with the engine off.
  2. Press the DIC MENU button to display the Vehicle Information menu.
  3. Press either the up or down arrows to view REMAINING OIL LIFE.
  4. Press the SET/CLR button until 100% is displayed.
  5. Turn the key to LOCK/OFF.

You’ll know it worked: The system is reset when the CHANGE ENGINE OIL SOON message goes off.

Operating the engine with the air cleaner/filter off can cause you or others to be burned.

when working on the engine and do not drive with the air cleaner/filter off.

If the air cleaner/filter is off, dirt can easily get into the engine, which could damage it.

Source: 2014 GMC Terrain/ Terrain Denali Owner Manual, page 10-12

Fuse box locations & fuse chart

Engine Compartment Fuse Block

What each fuse protects

FuseAmpsProtectsSource
1—Cool Fan 1p.10-34
4—Power Windows - Rightp.10-34
5—Memory Seat Modulep.10-34
7—Instrument Panel Fuse Block 1p.10-35
8—Rear Defoggerp.10-35
9—Starterp.10-35
10—AIR Pump Motorp.10-35
11—Instrument Panel Fuse Block 2p.10-35
12—Sunroofp.10-35
13—Antilock Brake System Pumpp.10-35
14—Instrument Panel Fuse Block 3p.10-35
15—Power Windows - Leftp.10-35
16—Antilock Brake System Modulep.10-35
17—Transmission Control Module Batteryp.10-35
18—Trailer Parking Lightp.10-35
19—AIR Pump Solenoidp.10-35
20—Engine Control Module Batteryp.10-35
21—Canister Ventp.10-35
22—Trailer Left Side (If Equipped)p.10-35
23—Lift Gate Modulep.10-35
24—Power Lumbarp.10-35
25—Trailer Right Side (If Equipped)p.10-35
26—Rear Accessory Power Outletp.10-35
27—Memory Mirror Modulep.10-35
28—Regulated Voltage Control Battery Sensorp.10-35
29—Front Wiperp.10-35
30—Rear Wiperp.10-35
31—Air Conditioning Compressorp.10-35
32—Rear Latchp.10-35
33—Heated Mirrorsp.10-35
34—Hornp.10-35
35—Right High-Beam Headlampp.10-35
36—Left High-Beam Headlampp.10-35
37—Ignition Even Coilp.10-35
38—Ignition Odd Coilp.10-35
39—Windshield Washerp.10-35
40—Front Fog Lampsp.10-35
41—Post Catalytic Converter Oxygen Sensorp.10-36
42—Engine Control Modulep.10-36
43—Pre-Catalytic Converter Oxygen Sensorp.10-36
44—Transmission Control Modulep.10-36
45—Mirrorp.10-36
46—Fuel System Control Module Ignitionp.10-36
47—Sparep.10-36
48—Rear Drive Modulep.10-36
49—Lift Gate Module Logicp.10-36
50—Instrument Panel Fuse Block Ignitionp.10-36
52—Fuel System Control Modulep.10-36
53—Engine Control Modulep.10-36
54—Rear Vision Camerap.10-36
55—Electric Power Steeringp.10-36
56—AIR Pump Solenoidp.10-36
57—Brake Boosterp.10-36
58—Cooling Fan Lowp.10-36
59—Headlamp High Beamp.10-36
61—Wiper On/Off Controlp.10-36
62—Air Conditioning Compressorp.10-36
63—Rear Defoggerp.10-36
64—Wiper Speedp.10-36
65—Fog Lampp.10-36
66—Engine Controlp.10-36
67—Starterp.10-36
68—Run/Crankp.10-36
69—Cooling Fan Highp.10-36
70—AIR Pump Motorp.10-36
77—Power Seat - Rightp.10-35
78—Passenger Power Lumberp.10-36

Instrument Panel Fuse Block

Where to find it

Instrument Panel Fuse Block The instrument panel fuse block is located on the passenger side panel of the center console.

open the fuse panel door from the passenger side by pulling it out.

Source: 2014 GMC Terrain/ Terrain Denali Owner Manual, page 10-37

More fuse pages in the manual

Diagrams and printed legends we can’t host. Check the box name printed on a diagram before counting positions.

Repair jobs for the 2014 GMC Terrain

All GMC repair jobs →

Other GMC Terrain years