Automatic transmission > Fluid type
Toyota Genuine ATF WS
Source: Toyota 2010 4Runner Owners Manual (OM35A36U), page 619
Owner’s manual specs
2010 Toyota 4Runner Specs: Fluids, Maintenance Schedule & Fuse Box
Figures for the 2010 Toyota 4Runner, copied from Toyota’s own owner’s manual. Every one links to the manual page it came from.
From the manufacturer’s manuals. Every figure here is copied from the manufacturer's own manual, with a link to the page it came from. Where a manual is unclear or contradicts itself, we leave the figure out.
Engines in this manual: 2.7 L, 4.0 L. Figures that differ by engine say which engine they are for.
Fluids & capacities
All engines
Cooling system > Coolant type
Use either of the following: • “Toyota Super Long Life Coolant” • A similar high-quality ethylene glycol- based non-silicate, non-amine, non- nitrite, and non-borate coolant with long- life hybrid organic acid technology Do not use plain water alone.
Source: Toyota 2010 4Runner Owners Manual (OM35A36U), page 616
Engine oil selection > Oil grade
ILSAC multigrade engine oil
Source: Toyota 2010 4Runner Owners Manual (OM35A36U), page 614
Engine oil selection > Recommended viscosity
SAE 0W-20
Source: Toyota 2010 4Runner Owners Manual (OM35A36U), page 614
2.7 L
Automatic transmission > Fluid capacity*
10.5 qt
9.9 L
Applies to: 2.7 L 4-cylinder (2TR-FE) engine
Source: Toyota 2010 4Runner Owners Manual (OM35A36U), page 619
Cooling system > Capacity
8.6 qt
8.1 L
Applies to: 2.7 L 4-cylinder (2TR-FE) engine
Source: Toyota 2010 4Runner Owners Manual (OM35A36U), page 616
4.0 L
Automatic transmission > Fluid capacity*
11.3 qt
10.7 L
Applies to: 4.0 L V6 (1GR-FE) engine
Source: Toyota 2010 4Runner Owners Manual (OM35A36U), page 619
Cooling system > Capacity
11.1 qt
10.5 L
Applies to: 4.0 L V6 (1GR-FE) engine
Source: Toyota 2010 4Runner Owners Manual (OM35A36U), page 616
Maintenance schedule
Normal service schedule
Use this for ordinary driving.
| Service | When |
|---|---|
| Clean cabin air filter Applies to: Schedule A - 4 Cylinder Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 4 | 15,000 mi, 45,000 mi, 75,000 mi, 105,000 mi |
| Clean cabin air filter Applies to: Schedule B - 6 Cylinder Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 6 | 15,000 mi, 45,000 mi, 75,000 mi, 105,000 mi |
| Replace cabin air filter Applies to: Schedule A - 4 Cylinder Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 4 | Every 30,000 mi or 36 months |
| Replace cabin air filter Applies to: Schedule B - 6 Cylinder Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 6 | Every 30,000 mi or 36 months |
| Replace engine air filter Applies to: Schedule A - 4 Cylinder Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 36 | Every 30,000 mi or 36 months |
| Replace engine air filter Applies to: Schedule B - 6 Cylinder Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 6 | Every 30,000 mi or 36 months |
| Replace engine oil and oil filter Applies to: Schedule B - 6 Cylinder Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 6 | Every 10,000 mi or 12 months |
| Replace engine oil and oil filter Applies to: Schedule A - 4 Cylinder Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 4 | Every 5,000 mi or 6 months |
Severe service schedule
Use this if you tow, idle a lot, drive short trips in the cold, or run in dust.
| Service | When |
|---|---|
| Inspect engine air filter Applies to: Schedule A - 4 Cylinder · Driving on dirt roads or dusty roads Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 4 | 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi, 55,000 mi, 65,000 mi, 70,000 mi, 75,000 mi, 80,000 mi, 85,000 mi, 95,000 mi, 100,000 mi, 105,000 mi, 110,000 mi, 115,000 mi |
| Inspect engine air filter Applies to: Schedule B - 6 Cylinder · Driving on dirt roads or dusty roads Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 6 | 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi, 55,000 mi, 65,000 mi, 70,000 mi, 75,000 mi, 80,000 mi, 85,000 mi, 95,000 mi, 100,000 mi, 105,000 mi, 110,000 mi, 115,000 mi |
| Replace engine oil and oil filter Applies to: Schedule B - 6 Cylinder · Driving on dirt roads or dusty roads Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 6 | 5,000 mi, 15,000 mi, 25,000 mi, 35,000 mi, 45,000 mi, 55,000 mi, 65,000 mi, 75,000 mi, 85,000 mi, 95,000 mi, 105,000 mi, 115,000 mi |
| Replace engine oil and oil filter Applies to: Schedule B - 6 Cylinder · Driving while towing Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 6 | 25,000 mi |
| Replace engine oil and oil filter Applies to: Schedule B - 6 Cylinder · Driving while towing, using a car-top carrier, or heavy vehicle loading Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 6 | 5,000 mi, 15,000 mi, 35,000 mi, 45,000 mi, 55,000 mi, 65,000 mi, 75,000 mi, 85,000 mi, 95,000 mi, 105,000 mi, 115,000 mi |
| Replace engine oil and oil filter Applies to: Schedule B - 6 Cylinder · Extensive idling and/or low speed driving for a long distance such as police, taxi or door-to-door delivery use Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 6 | 5,000 mi, 15,000 mi, 25,000 mi, 35,000 mi, 45,000 mi, 55,000 mi, 65,000 mi, 75,000 mi, 85,000 mi, 95,000 mi, 105,000 mi, 115,000 mi |
| Replace engine oil and oil filter Applies to: Schedule B - 6 Cylinder · Repeated trips of less than five miles in temperatures below 32°F / 0°C Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 6 | 5,000 mi, 15,000 mi, 25,000 mi, 35,000 mi, 45,000 mi, 55,000 mi, 65,000 mi, 75,000 mi, 85,000 mi, 95,000 mi, 105,000 mi, 115,000 mi |
| Replace front differential oil (4WD) Applies to: Schedule A - 4 Cylinder · Driving while towing, using a car-top carrier, or heavy vehicle loading Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 4 | Every 15,000 mi or 18 months |
| Replace front differential oil (4WD) Applies to: Schedule B - 6 Cylinder · Driving while towing, using a car-top carrier, or heavy vehicle loading Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 6 | Every 15,000 mi or 18 months |
| Replace rear differential oil Applies to: Schedule A - 4 Cylinder · Driving while towing, using a car-top carrier, or heavy vehicle loading Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 4 | Every 15,000 mi or 18 months |
| Replace rear differential oil Applies to: Schedule B - 6 Cylinder · Driving while towing, using a car-top carrier, or heavy vehicle loading Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 6 | Every 15,000 mi or 18 months |
| Replace transfer case oil (4WD) Applies to: Schedule A - 4 Cylinder · Driving on dirt roads or dusty roads Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 4 | Every 30,000 mi or 36 months |
| Replace transfer case oil (4WD) Applies to: Schedule B - 6 Cylinder · Driving on dirt roads or dusty roads Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 6 | Every 30,000 mi or 36 months |
| Replace transfer case oil (4WD) Applies to: Schedule A - 4 Cylinder · Driving while towing, using a car-top carrier, or heavy vehicle loading Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 36 | Every 30,000 mi or 36 months |
| Replace transfer case oil (4WD) Applies to: Schedule B - 6 Cylinder · Driving while towing, using a car-top carrier, or heavy vehicle loading Source: Toyota 2010 4Runner Warranty and Maintenance Guide, page 6 | Every 30,000 mi or 36 months |
Oil life & reset procedures
Reset the maintenance data (U.S.A. only)
Before you start
- After the required maintenance is performed according to the maintenance schedule, please reset the maintenance data.
Steps
- Switch the display to the trip meter A (→P. 184) when the engine is running.
- Vehicles without a smart key system
- Turn the engine switch off.
- Vehicles with a smart key system
- Turn the “ENGINE START STOP” switch off.
- Vehicles without a smart key system
- While pressing the trip meter reset button (→P. 184), turn the engine switch to the “ON” position (do not start the engine because reset mode will be canceled). Continue to press and hold the button until the trip meter displays “000000”.
- Vehicles with a smart key system
- While pressing the trip meter reset button (→P. 184), turn the “ENGINE START STOP” switch to the IGNITION ON mode (do not start the engine because otherwise the reset mode will be can- celed). Continue to press and hold the button until the trip meter displays “000000”.
- Maintenance and care
You’ll know it worked: While pressing the trip meter reset button (→P. 184), turn the “ENGINE START STOP” switch to the IGNITION ON mode (do not start the engine because otherwise the reset mode will be can- celed). Continue to press and hold the button until the trip meter displays “000000”.
Source: Toyota 2010 4Runner Owners Manual (OM35A36U), page 485
Fuse box locations & fuse chart
Engine compartment
What each fuse protects
| Fuse | Amps | Protects | Source |
|---|---|---|---|
| 1 | 10.0A | Stop/tail lights | p.538 |
| 2 | 7.5A | Instrument panel lights | p.538 |
| 3 | 7.5A | Meter and gauge | p.538 |
| 4 | 10.0A | Multiport fuel injection system/ sequential multiport fuel injection system, air bag system, smart key system | p.538 |
| 5 | 20.0A | Wiper and washer | p.538 |
| 6 | 30.0A | Wiper and washer | p.538 |
| 7 | 25.0A | Electric moon roof | p.538 |
| 8 | 25.0A | Power windows | p.538 |
| 9 | 25.0A | Power windows | p.538 |
| 10 | 30.0A | Multiplex communication system | p.538 |
| 11 | 30.0A | Power windows | p.538 |
| 12 | 30.0A | Front passenger's power seat | p.538 |
| 13 | 20.0A | Seat heater system | p.538 |
| 14 | 10.0A | Air conditioning system, multiport fuel injection system/ sequential multiport fuel injection system | p.538 |
| 25 | — | No circuit | p.536 |
| 25 | 20.0A | Four wheel drive system | p.539 |
| 31 | 30.0A | ABS, VSC | p.536 |
| 32 | 50.0A | Multiport fuel injection system/ sequential multiport fuel injection system | p.536 |
| 33 | 10.0A | Interior lights, vanity lights | p.536 |
| 34 | 10.0A | Multiplex communication system, meter and gauge | p.536 |
| 35 | 10.0A | Right-hand headlight (low beam) | p.536 |
| 36 | 10.0A | Left-hand headlight (low beam) | p.536 |
| 37 | 10.0A | Multiport fuel injection system/ sequential multiport fuel injection system | p.536 |
| 38 | 7.5A | Multiport fuel injection system/ sequential multiport fuel injection system | p.537 |
| 39 | — | HTR, 400W INV, A/C COMP, TOWING TAIL, SUB BATT, MIR HTR, DEF, DEICER, STOP, PTC HTR NO.1, PTC HTR NO.2, PTC HTR NO.3, S/HTR FR, ACC, P/OUTLET, IG1, ECU-IG NO.1, ECU-IG NO.2, WIP, WASHER, KDSS, 4WD, BKUP LP, TOWING BKUP, DOOR P, DOOR RL, DOOR RR, DOOR D, P/SEAT FL, P/SEAT FR, DOOR, A/C, OBD, DOOR BACK, S/ROOF, PANEL, TAIL, FOG FR, D/L NO.2 fuses | p.537 |
| 43 | 80.0A | IG2, EFI, A/F, HORN fuses | p.537 |
| 44 | 10.0A | Multiport fuel injection system/ sequential multiport fuel injection system | p.537 |
| 45 | 7.5A | Smart key system | p.537 |
| 46 | 20.0A | Steering lock system | p.537 |
| 47 | 30.0A | Trailer brake controller | p.537 |