Straight from the manufacturer's own manual.* Every number shows its page.* If we don't know, we say we don't know.*
GARAGE JOB ENGINE™ * 5W-AI

2020 GMC Sierra Specs: Oil Capacity, Fluids, Maintenance Schedule & Fuse Box

Figures for the 2020 GMC Sierra, copied from GMC’s own owner’s manual. Every one links to the manual page it came from.

From the manufacturer’s manuals. Every figure here is copied from the manufacturer's own manual, with a link to the page it came from. Where a manual is unclear or contradicts itself, we leave the figure out.

Engines in this manual: 2.7L L4, 4.3L V6, 5.3L V8, 6.2L V8, 6.6L V8. Figures that differ by engine say which engine they are for.

Fluids & capacities

2.7L L4

4.3L V6

5.3L V8

6.2L V8

6.6L V8

Maintenance schedule

Normal service schedule

Use this for ordinary driving.

ServiceWhen
If the vehicle is not equipped with the engine air filter life system, replace engine air cleaner filter. (2)

Source: 2020 GMC Sierra/ Sierra Denali Owner Manual, page 445

Every 45,000 mi(72,000 km)
Replace passenger compartment air filter. (1)

Source: 2020 GMC Sierra/ Sierra Denali Owner Manual, page 445

Every 22,500 mi(36,000 km)
Rotate tires and perform Required Services. Check engine oil level and oil life percentage. Change engine oil and filter, if needed. Check engine air filter life percentage and status. Change engine air filter, if needed.

Source: 2020 GMC Sierra/ Sierra Denali Owner Manual, page 445

Every 7,500 mi(12,000 km)

Severe service schedule

Use this if you tow, idle a lot, drive short trips in the cold, or run in dust.

ServiceWhen
Change automatic transmission fluid and filter.

Source: 2020 GMC Sierra/ Sierra Denali Owner Manual, page 448

Every 45,000 mi(72,000 km)
Replace passenger compartment air filter. (1)

Source: 2020 GMC Sierra/ Sierra Denali Owner Manual, page 448

Every 22,500 mi(36,000 km)
Rotate tires and perform Required Services. Check engine oil level and oil life percentage. Change engine oil and filter, if needed. Check engine air filter life percentage and status. Change engine air filter, if needed.

Source: 2020 GMC Sierra/ Sierra Denali Owner Manual, page 448

Every 7,500 mi(12,000 km)

Oil life & reset procedures

Engine oil life system reset

Before you start

  • Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change.

Steps

  1. Display the oil life percentage on the DIC. See Driver Information Center (DIC) (Base Level) 0 148 or Driver Information Center (DIC) (Midlevel and Uplevel) 0 149.
  2. Press the thumbwheel on the steering wheel, or the trip odometer reset stem if the vehicle does not have DIC
  3. If the display changes to 100%, the system is reset.

You’ll know it worked: The oil life will change to 100%.

Use of the incorrect automatic transmission fluid may damage the vehicle, and the damage may (Continued) Caution (Continued) not be covered by the vehicle warranty.

Source: 2020 GMC Sierra/ Sierra Denali Owner Manual, page 342

Fuse box locations & fuse chart

Engine Compartment Fuse Block

Where to find it

engine compartment fuse block is in the engine compartment, on the passenger side of the vehicle for 1500 and driver side of vehicle for 2500/3500.

Lift the cover to access the fuse block.

Source: 2020 GMC Sierra/ Sierra Denali Owner Manual, page 371

What each fuse protects

FuseAmpsProtectsSource
2—High-beam rightp.372
4—Headlamp rightp.372
5—Headlampp.374
6—TIMp.372
8—Fog lampp.372
9—VKMp.372
11—Police upfitterp.372
13—Washer frontp.372
14—Washer rearp.372
15—MSB driverp.372
17—IECL 1p.372
18—DC/AC inverterp.374
19—DC/AC inverterp.372
20—IECR 2 (LD) / EBCM2 (HD)p.372
21—MSB passp.372
22—IECL 2p.372
23—Rear window defoggerp.374
24—EBCM 1p.372
27—Hornp.373
32—Rear window defoggerp.373
33—Heated mirrorp.373
34—Parking lamp leftp.373
35—Parking lampp.374
36—Run/Crankp.374
37—Euro trailerp.373
38—TIMp.373
40—Misc ignitionp.373
41—Trailer parking lampp.373
42—Park lamp rightp.373
43—Second fuel pumpp.374
45—Second fuel pumpp.373
47—Transmission control module ignitionp.373
49—Transmission control modulep.373
50—A/C clutchp.373
51—Transfer case control modulep.373
52—Front wiperp.373
53—Center high-mounted stop lampp.373
54—Trailer reverse lampp.373
55—Trailer back-up lampp.373
56—SADSp.373
57—TTPMp.373
58—Starter motor (LD & HD DSL)p.373
59—A/C clutchp.374
61—VESp.373
62—Integrated chassis control module/CVSp.373
63—Trailer batteryp.373
64—Starter Motor (LD & HD DSL) / Cool Fan Clutch (HD Gas)p.374
65—Auxiliary underhood electrical centerp.373
66—Cooling fan motor leftp.373
67—Active fuel management 2p.373
69—Starter Pinion (LD) / Starter Motor (HD Gas)p.373
70—Starter Pinion (LD) / Starter Motor (HD Gas)p.374
71—Cooling fanp.373
72—Cooling fan rightp.373
73—Trailer stop/turn lamp leftp.373
74—TIMp.373
76—Electric RNG BDSp.374
77—Powertrainp.374
78—Engine control modulep.374
79—Auxiliary batteryp.374
80—Cabin cooling pumpp.374
81—Trailer stop/turn lamp rightp.374
82—TIMp.374
83—FTZMp.374
84—Trailer brakep.374
85—ENGp.374
86—Engine control modulep.374
87—Injector B evenp.374
88—O2 B sensorp.374
89—O2 A sensorp.374
90—Injector A oddp.374

Instrument Panel Fuse Block (Left)

Where to find it

Instrument Panel Fuse Block (Left) The left instrument panel fuse block access door is on the driver side edge of the instrument panel.

Pull off the cover to access the fuse block.

Source: 2020 GMC Sierra/ Sierra Denali Owner Manual, page 374

Instrument Panel Fuse Block (Right)

Where to find it

Instrument Panel Fuse Block (Right) The right instrument panel fuse block access door is on the passenger side edge of the instrument panel.

Pull off the cover to access the front of the fuse block.

Source: 2020 GMC Sierra/ Sierra Denali Owner Manual, page 376

More fuse pages in the manual

Diagrams and printed legends we can’t host. Check the box name printed on a diagram before counting positions.

All GMC repair jobs →

Other GMC Sierra years