Straight from the manufacturer's own manual.* Every number shows its page.* If we don't know, we say we don't know.*
GARAGE JOB ENGINE™ * 5W-AI

Owner’s manual specs

2008 Chevrolet Trailblazer Specs: Oil Life Reset

Figures for the 2008 Chevrolet Trailblazer, copied from Chevrolet’s own owner’s manual. Every one links to the manual page it came from.

From the manufacturer’s manuals. Every figure here is copied from the manufacturer's own manual, with a link to the page it came from. Where a manual is unclear or contradicts itself, we leave the figure out.

Oil life & reset procedures

Engine oil life system reset

Before you start

  • with the engine off.

Steps

  1. Turn the ignition key to ON/RUN with the engine off.
  2. Fully press and release the accelerator pedal slowly three times within five seconds. The change engine oil light will flash while the system is resetting.
  3. When the light stops flashing, turn the key to LOCK/OFF.
  4. Reinstall the cover and tighten the screws.

Source: 2008 Chevrolet Trailblazer Owner Manual, page 5-23

Not on this page

  • Fluids & capacities: The manual gives different answers by configuration, so we've left them out.
  • Maintenance schedule: The manual gives different answers by configuration, so we've left them out.
  • Fuse box locations & fuse chart: The manual gives different answers by configuration, so we've left them out.

All Chevrolet repair jobs →

Other Chevrolet Trailblazer years