Straight from the manufacturer's own manual.* Every number shows its page.* If we don't know, we say we don't know.*
GARAGE JOB ENGINE™ * 5W-AI

Owner’s manual specs

2020 GMC Yukon Specs: Oil Capacity, Fluids, Maintenance Schedule & Fuse Box

Figures for the 2020 GMC Yukon, copied from GMC’s own owner’s manual. Every one links to the manual page it came from.

From the manufacturer’s manuals. Every figure here is copied from the manufacturer's own manual, with a link to the page it came from. Where a manual is unclear or contradicts itself, we leave the figure out.

Engines in this manual: 5.3L V8, 6.2L V8. Figures that differ by engine say which engine they are for.

Fluids & capacities

All engines

5.3L V8

6.2L V8

Maintenance schedule

Normal service schedule

Use this for ordinary driving.

ServiceWhen
Replace engine air cleaner filter. (3)

Source: 2020 GMC Yukon/Yukon XL/Denali Owner Manual, page 381

Every 45,000 mi(72,000 km)
Replace passenger compartment air filter. (1)

Source: 2020 GMC Yukon/Yukon XL/Denali Owner Manual, page 381

Every 22,500 mi(36,000 km)
Rotate tires and perform Required Services. Check engine oil level and oil life percentage. Change engine oil and filter, if needed.

Source: 2020 GMC Yukon/Yukon XL/Denali Owner Manual, page 381

Every 7,500 mi(12,000 km)

Severe service schedule

Use this if you tow, idle a lot, drive short trips in the cold, or run in dust.

ServiceWhen
Change automatic transmission fluid and filter.

Source: 2020 GMC Yukon/Yukon XL/Denali Owner Manual, page 383

Every 45,000 mi(72,000 km)
Replace engine air cleaner filter. (3)

Source: 2020 GMC Yukon/Yukon XL/Denali Owner Manual, page 383

Every 45,000 mi(72,000 km)
Replace passenger compartment air filter. (1)

Source: 2020 GMC Yukon/Yukon XL/Denali Owner Manual, page 383

Every 22,500 mi(36,000 km)
Rotate tires and perform Required Services. Check engine oil level and oil life percentage. Change engine oil and filter, if needed.

Source: 2020 GMC Yukon/Yukon XL/Denali Owner Manual, page 383

Every 7,500 mi(12,000 km)

Oil life & reset procedures

Engine oil life system reset

Before you start

  • Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change.

Steps

  1. Display the REMAINING OIL LIFE on the DIC. See Driver Information Center (DIC) 0 144.
  2. Press and hold V. The oil life will change to 100%.
  3. Display the REMAINING OIL LIFE on the DIC. If the display shows 100%, the system is reset.
  4. Allow the engine to idle (500- 800 rpm) for at least one minute. Slowly release the brake pedal.
  5. Keep the engine running and check the transmission fluid temperature on the Driver
  6. Using the transmission fluid temperature reading, determine and perform the appropriate check procedure. If the transmission fluid temperature reading is not within the required temperature ranges, allow the vehicle to cool, or operate the vehicle until the appropriate transmission fluid temperature is reached.

You’ll know it worked: The oil life will change to 100%.

Use of the incorrect automatic transmission fluid may damage the vehicle, and the damage may not be covered by the vehicle warranty.

(Continued) automatic transmission fluid.

Too much or too little fluid can damage the transmission.

(Continued) transmission to overheat.

Source: 2020 GMC Yukon/Yukon XL/Denali Owner Manual, page 292

Fuse box locations & fuse chart

Engine Compartment Fuse Block

Where to find it

Engine Compartment Fuse Block The engine compartment fuse block is in the engine compartment, on the driver side of the vehicle.

Lift the cover to access the fuse block.

Source: 2020 GMC Yukon/Yukon XL/Denali Owner Manual, page 315

What each fuse protects

FuseAmpsProtectsSource
1—Power assist stepsp.318
2—Antilock brake system pumpp.318
3—Interior BEC LT1p.318
4—Passenger motorized seat beltp.318
5—Suspension leveling compressorp.318
6—4WD transfer case electronic controlp.318
9—Fuel pumpp.320
10—Electric parking brake/-p.318
13—Interior BEC LT2p.318
14—Rear BEC 1p.318
17—Driver motorized seat beltp.318
21—Automatic headlamp leveling/ Exhaust solenoidp.318
22—Fuel pumpp.318
23—Integrated chassis control modulep.318
24—Real time dampeningp.318
25—Fuel pump power modulep.318
26—Active Hydraulic Assist/ Battery regulated voltage controlp.318
28—Upfitter 2p.318
29—Upfitter 2p.320
31—Trailer interface modulep.318
34—Reverse lampsp.318
35—Antilock brake system valvep.318
36—Trailer brakesp.318
37—Upfitter 3p.320
39—Right trailer stoplamp/Turn signal lampp.318
40—Left trailer stoplamp/turn signal lampp.318
41—Trailer parking lampsp.318
42—Right parking lampsp.318
43—Left parking lampsp.318
44—Upfitter 3p.318
45—Automatic level control/Run/Crankp.319
47—Upfitter 4p.319
48—Upfitter 4p.320
49—Reverse lampsp.319
51—Parking lampp.320
59—Euro trailerp.319
60—Air conditioning controlp.319
63—Upfitter 1p.319
64—Secondary fuel pumpp.320
67—Trailer batteryp.319
68—Secondary fuel pumpp.319
69—RC upfitter 3 and 4p.319
70—VBAT upfitter 3 and 4p.319
72—Upfitter 1p.320
74—Engine control module/Ignitionp.319
75—Miscellaneous/ Ignition/-p.319
76—Transmission/ Ignitionp.319
77—RC upfitter 1 and 2p.319
78—VBAT upfitter 1 and 2p.319
83—Euro trailer/RCp.319
84—Run/Crankp.320
87—MAF/IAT/Humidity/ TIAP sensorp.319
88—Injector A - oddp.319
89—Injector B - evenp.319
90—O2 sensor Bp.319
91—Throttle controlp.319
92—Engine control modulep.320
93—Hornp.319
94—Fog lampsp.319
95—High-beam headlampsp.319
100—O2 sensor Ap.319
102—Engine control module/ Transmission control modulep.320
103—Auxiliary interior heaterp.320
104—Starterp.320
107—Aeroshutterp.320
109—Police upfitterp.320
112—Starterp.320
114—Front windshield washerp.320
115—Rear window washerp.320
116—Left cooling fanp.320
121—Right HID headlampp.320
122—Left HID headlampp.320
123—Right cooling fanp.320

Instrument Panel Fuse Block (Left)

Where to find it

Instrument Panel Fuse Block (Left) The left instrument panel fuse block access door is on the driver side edge of the instrument panel.

Pull off the cover to access the fuse block.

Source: 2020 GMC Yukon/Yukon XL/Denali Owner Manual, page 323

Instrument Panel Fuse Block (Right)

Where to find it

Instrument Panel Fuse Block (Right) The right instrument panel fuse block access door is on the passenger side edge of the instrument panel.

Pull off the cover to access the fuse block.

Source: 2020 GMC Yukon/Yukon XL/Denali Owner Manual, page 320

What each fuse protects

FuseAmpsProtectsSource
4—Accessory power outlet 4p.321
8—Glove boxp.321
12—Steering wheel controlsp.321
13—Body control module 8p.321
19—Body control module 4p.322
20—Rear seat entertainmentp.322
21—Sunroof/beacon upffiterp.322
26—Infotainment/Airbagp.322
27—-/RF window switch/ Rain sensorp.322
28—Obstacle detection/USBp.322
29—Radiop.322
36—Special equipment option B2p.322
37—Special equipment optionp.322
38—Body control module 2p.322
39—DC to AC inverterp.322
44—Right door window motorp.322
45—Front blowerp.322
46—Body control module 6p.322
47—Body control module 7p.322
48—Amplifierp.322
49—Right front seatp.322
50—Accessory power outlet 3p.322
52—Retained accessory powerp.322

All GMC repair jobs →

Other GMC Yukon years