Straight from the manufacturer's own manual.* Every number shows its page.* If we don't know, we say we don't know.*
GARAGE JOB ENGINE™ * 5W-AI

2017 GMC Yukon XL Specs: Oil Capacity, Fluids & Maintenance Schedule

Figures for the 2017 GMC Yukon XL, copied from GMC’s own owner’s manual. Every one links to the manual page it came from.

From the manufacturer’s manuals. Every figure here is copied from the manufacturer's own manual, with a link to the page it came from. Where a manual is unclear or contradicts itself, we leave the figure out.

Fluids & capacities

All engines

5.3L V8

Maintenance schedule

Normal service schedule

Use this for ordinary driving.

ServiceWhen
Replace engine air cleaner filter. (3)

Source: 2017 GMC Yukon / Yukon XL / Denali Owner Manual, page 379

Every 45,000 mi(72,000 km)
Replace passenger compartment air filter. (1)

Source: 2017 GMC Yukon / Yukon XL / Denali Owner Manual, page 379

Every 22,500 mi(36,000 km)
Rotate tires and perform Required Services. Check engine oil level and oil life percentage. Change engine oil and filter, if needed.

Source: 2017 GMC Yukon / Yukon XL / Denali Owner Manual, page 379

Every 7,500 mi(12,000 km)

Severe service schedule

Use this if you tow, idle a lot, drive short trips in the cold, or run in dust.

ServiceWhen
Change automatic transmission fluid and filter.

Source: 2017 GMC Yukon / Yukon XL / Denali Owner Manual, page 381

Every 45,000 mi(72,000 km)
Replace engine air cleaner filter. (3)

Source: 2017 GMC Yukon / Yukon XL / Denali Owner Manual, page 381

Every 45,000 mi(72,000 km)
Replace passenger compartment air filter. (1)

Source: 2017 GMC Yukon / Yukon XL / Denali Owner Manual, page 381

Every 22,500 mi(36,000 km)
Rotate tires and perform Required Services. Check engine oil level and oil life percentage. Change engine oil and filter, if needed.

Source: 2017 GMC Yukon / Yukon XL / Denali Owner Manual, page 381

Every 7,500 mi(12,000 km)

Oil life & reset procedures

Engine oil life system reset

Before you start

  • Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change.

Steps

  1. Display the REMAINING OIL LIFE on the DIC. See Driver Information Center (DIC) 0 153.
  2. Press and hold V. The oil life will change to 100%.
  3. Display the REMAINING OIL LIFE on the DIC. If the display shows 100%, the system is reset.
  4. Allow the engine to idle (500- 800 rpm) for at least one minute. Slowly release the brake pedal.
  5. Keep the engine running and check the transmission fluid temperature on the Driver
  6. Using the transmission fluid temperature reading, determine and perform the appropriate check procedure. If the transmission fluid temperature reading is not within the required temperature ranges, allow the vehicle to cool, or operate the vehicle until the appropriate transmission fluid temperature is reached.

You’ll know it worked: The oil life will change to 100%.

Use of the incorrect automatic transmission fluid may damage the vehicle, and the damage may not be covered by the vehicle warranty.

(Continued) automatic transmission fluid listed in Recommended Fluids and Lubricants 0 386.

Too much or too little fluid can damage the transmission.

(Continued) transmission to overheat.

Source: 2017 GMC Yukon / Yukon XL / Denali Owner Manual, page 294

Not on this page

  • Fuse box locations & fuse chart: The manual we hold doesn't cover this.

All GMC repair jobs →

Other GMC Yukon XL years