Engine oil life system reset
Steps
- With the ignition key in RUN but the engine off, repeatedly push the trip/reset button until OIL is displayed on the Driver Information Center (DIC).
- Once OIL is displayed, push and hold the trip/reset button for five seconds. The number will disappear and be replaced by 100 (indicating 100% oil life remaining).
- Turn the key to OFF.
- Inspect or replace the engine air cleaner/filter.
- Align the tabs located on the bottom of the panel with the slots at the bottom of the housing.
- Latch the hooks to secure the panel in place. If the panel moves easily, check that the tabs are seated correctly in the slots.
- Put the duct back on and reinstall the clamps.
Operating the engine with the air cleaner/filter off can cause you or others to be burned.