Owner’s manual specs

2008 Chevrolet Uplander Specs: Fuse Box & Oil Life Reset

Figures for the 2008 Chevrolet Uplander, copied from Chevrolet’s own owner’s manual. Every one links to the manual page it came from.

From the manufacturer’s manuals. Every figure here is copied from the manufacturer's own manual, with a link to the page it came from. Where a manual is unclear or contradicts itself, we leave the figure out.

Oil life & reset procedures

Engine oil life system reset

Steps

With the ignition key in ON/RUN but the engine off, repeatedly push the set/reset button until OIL is displayed on the Driver Information Center (DIC).
Once OIL is displayed, push and hold the set/reset button for ﬁve seconds. The number will disappear and be replaced by 100 (indicating 100% oil life remaining).
Turn the key to LOCK/OFF.

Source: 2008 Chevrolet Uplander Owner Manual, page 5-17

Fuse box locations & fuse chart

Instrument Panel Fuse Block

Where to find it

Instrument Panel Fuse Block The instrument panel fuse block is located at the right end of the instrument panel, on the passenger side of the vehicle.

Open the front passenger's door, and remove the cover, to access the fuse block.

Source: 2008 Chevrolet Uplander Owner Manual, page 5-100

Diagrams in the manual

2008 Chevrolet Uplander Owner Manual, page 5-100

What each fuse protects

Fuse	Amps	Protects	Source
33	—	Fan 2	p.5-104
34	—	Front Blower High	p.5-104
35	—	Battery Main 3	p.5-104
36	—	Rear Defogger	p.5-104
37	—	Battery Main 2	p.5-104
38	—	Spare	p.5-104

More fuse pages in the manual

Diagrams and printed legends we can’t host. Check the box name printed on a diagram before counting positions.

Not on this page

Fluids & capacities: The manual gives different answers by configuration, so we've left them out.
Maintenance schedule: The manual gives different answers by configuration, so we've left them out.

All Chevrolet repair jobs →

Other Chevrolet Uplander years

← 2007 Chevrolet Uplander specs