Straight from the manufacturer's own manual.* Every number shows its page.* If we don't know, we say we don't know.*
GARAGE JOB ENGINE™ * 5W-AI

Owner’s manual specs

2006 Chevrolet Monte Carlo Specs: Fuse Box & Oil Life Reset

Figures for the 2006 Chevrolet Monte Carlo, copied from Chevrolet’s own owner’s manual. Every one links to the manual page it came from.

From the manufacturer’s manuals. Every figure here is copied from the manufacturer's own manual, with a link to the page it came from. Where a manual is unclear or contradicts itself, we leave the figure out.

Oil life & reset procedures

Engine oil life system reset

Before you start

  • with the engine off.

Steps

  1. Turn the ignition to RUN, with the engine off.
  2. Fully press and release the accelerator pedal slowly three times within five seconds. If the CHANGE ENGINE OIL SOON message flashes, the system is reset. However, if it stays on, it did not reset. Repeat the procedure.
  3. Turn the key to OFF.
  4. Inspect or replace the engine air cleaner/filter.
  5. To reinstall the cover, position the tabs through the hinges on the housing.
  6. Push the cover tabs on top of the housing to lock the cover in place.

You’ll know it worked: If the CHANGE ENGINE OIL SOON message flashes, the system is reset.

Source: 2006 Chevrolet Monte Carlo Owner Manual, page 5-21

Fuse box locations & fuse chart

Instrument Panel Fuse Block

Where to find it

Instrument Panel Fuse Block The fuse block is located on the passenger side of the vehicle in the carpet molding.

Remove the fuse block door to access the fuses.

Source: 2006 Chevrolet Monte Carlo Owner Manual, page 5-95

Not on this page

  • Fluids & capacities: The manual we hold doesn't cover this.
  • Maintenance schedule: The manual we hold doesn't cover this.

All Chevrolet repair jobs →

Other Chevrolet Monte Carlo years