Straight from the manufacturer's own manual.* Every number shows its page.* If we don't know, we say we don't know.*
GARAGE JOB ENGINE™ * 5W-AI

Owner’s manual specs

2010 Chevrolet Cobalt Specs: Oil Capacity, Fluids & Fuse Box

Figures for the 2010 Chevrolet Cobalt, copied from Chevrolet’s own owner’s manual. Every one links to the manual page it came from.

From the manufacturer’s manuals. Every figure here is copied from the manufacturer's own manual, with a link to the page it came from. Where a manual is unclear or contradicts itself, we leave the figure out.

Engines in this manual: 2.0L L4, 2.2L L4. Figures that differ by engine say which engine they are for.

Fluids & capacities

All engines

2.0L L4

2.2L L4

Oil life & reset procedures

Engine oil life system reset

Before you start

  • Turn the ignition to ON/RUN, with the engine off.

Steps

  1. Turn the ignition to ON/RUN, with the engine off.
  2. Press the information and reset buttons on the Driver Information Center (DIC) at the same time to enter the personalization menu. See DIC Vehicle Personalization on page 4‑46.
  3. Press the information button to scroll through the available personalization menu modes until the DIC display shows OIL‐LIFE RESET.
  4. Press and hold the reset button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
  5. Turn the key to LOCK/OFF.

Source: 2010 Chevrolet Cobalt Owner Manual, page 6-22

Fuse box locations & fuse chart

Engine Compartment Fuse Block

Where to find it

Engine Compartment Fuse Block The engine compartment fuse block is located on the driver side of the vehicle.

Lift off the cover to check the fuses.

Source: 2010 Chevrolet Cobalt Owner Manual, page 6-127

Not on this page

  • Maintenance schedule: The manual gives different answers by configuration, so we've left them out.

All Chevrolet repair jobs →

Other Chevrolet Cobalt years