Straight from the manufacturer's own manual.* Every number shows its page.* If we don't know, we say we don't know.*
GARAGE JOB ENGINE™ * 5W-AI

Owner’s manual specs

2011 Chevrolet Camaro Specs: Oil Capacity, Fluids & Fuse Box

Figures for the 2011 Chevrolet Camaro, copied from Chevrolet’s own owner’s manual. Every one links to the manual page it came from.

From the manufacturer’s manuals. Every figure here is copied from the manufacturer's own manual, with a link to the page it came from. Where a manual is unclear or contradicts itself, we leave the figure out.

Engines in this manual: 3.6L V6, 6.2L V8. Figures that differ by engine say which engine they are for.

Fluids & capacities

All engines

3.6L V6

6.2L V8

Oil life & reset procedures

Engine oil life system reset

Before you start

  • Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change.
  • Turn the ignition to ON/RUN with the engine off.

Steps

  1. Turn the ignition to ON/RUN with the engine off.
  2. Fully press and release the accelerator pedal three times within five seconds.

You’ll know it worked: The system is reset when the CHANGE ENGINE OIL SOON message goes off.

Source: 2011 Chevrolet Camaro Owner Manual, page 10-14

Fuse box locations & fuse chart

Engine Compartment Fuse Block

Diagrams in the manual

What each fuse protects

FuseAmpsProtectsSource
1—Air Conditioning Compressor Clutchp.10-44
2—Transmission Control Modulep.10-44
5—Engine Control Module Mainp.10-44
6—Wiperp.10-44
7—Pre-Catalytic Converter Oxygen Sensorp.10-45
8—Post-Catalytic Converter Oxygen Sensorp.10-45
9—Fuel Injectors - Evenp.10-45
10—Fuel Injectors - Oddp.10-45
11—Cooling Fan Relayp.10-45
12—Starterp.10-44
14—Manifold Air Flow/ Chassis Controlp.10-45
15—Ignitionp.10-45
16—Run/Crank IPp.10-45
17—Sensing Diagnostic Module/Ignitionp.10-45
18—Run/Crank Bodyp.10-45
19—Transmission Control Module/ Ignitionp.10-45
20—Engine Control Module/Ignitionp.10-45
22—Brake Vacuum Pumpp.10-44
25—Power Windows Rearp.10-44
26—Power Windows Frontp.10-44
27—Rear Defogp.10-44
31—Outside Rearview Mirrorp.10-45
32—Canister Vent Solenoidp.10-45
33—Body Control Module #6p.10-45
34—Sunroofp.10-45
35—Front Heated Seatsp.10-45
38—Washer Pump Frontp.10-45
40—Antilock Brake System Valvesp.10-45
41—Cooling Fan Highp.10-44
43—Antilock Brake System Pumpp.10-44
44—Cooling Fan Lowp.10-44
46—HID Headlamp - Left Frontp.10-45
47—HID Headlamp - Right Frontp.10-45
50—Fog Lampsp.10-45
51—Hornp.10-45
52—Sparep.10-45
55—High‐Beam Headlamp - Right Frontp.10-46
56—High‐Beam Headlamp -Left Frontp.10-46
61—Heated Mirrorp.10-46

Instrument Panel Fuse Block

Where to find it

Instrument Panel Fuse Block The instrument panel fuse block is located on the end of the instrument panel, on the driver side of the vehicle.

pressor Clutch K619 Wiper Speed K627 High Intensity Discharge Headlamps K632 Brake Vacuum Pump Instrument Panel Fuse Block The instrument panel fuse block is located on the end of the instrument panel, on the driver side of the vehicle.

Source: 2011 Chevrolet Camaro Owner Manual, page 10-46

Diagrams in the manual

Rear Compartment Fuse Block

Where to find it

Rear Compartment Fuse Block The rear compartment fuse block is located on the right side of the trunk behind a cover.

Source: 2011 Chevrolet Camaro Owner Manual, page 10-48

Diagrams in the manual

More fuse pages in the manual

Diagrams and printed legends we can’t host. Check the box name printed on a diagram before counting positions.

Not on this page

  • Maintenance schedule: The manual we hold doesn't cover this.

All Chevrolet repair jobs →

Other Chevrolet Camaro years